Udor KAPPA 15 DC — 3.5 GPM (13.3 L/min) Diaphragm Pump

As the bare pump behind the KAPPA 15 12-Volt, the KAPPA 15 DC is supplied without a motor for anyone rebuilding or repairing an existing spray unit rather than buying a complete kit. Run at its rated 1450 RPM, it delivers 13.3 L/min (3.5 GPM) at up to 20 bar (275 PSI), figures that reflect the pump’s own capability once decoupled from the electric motor’s amperage limits. At just 14 lbs, it drops straight onto the same mounting pattern as the assembled unit for a fast swap.

Specifications

Model	Udor KAPPA 15 DC
Flow Rate	13.3 L/min (3.5 GPM)
Max Pressure	20 bar (275 PSI)
Speed	1450 RPM
Drive Configuration	Bare replacement pump for KAPPA 15 12-Volt
Weight	6.4 kg (14 lbs)
Type	Diaphragm Pump

Applications

• Replacement pump for an existing KAPPA 15 12-Volt unit
• OEM fitment for equipment manufacturers
• Rebuilding older 12-volt spray rigs
• Spare parts stock for spray fleets

Key Features

• Bare replacement pump for the KAPPA 15 12-Volt
• Rated to 1450 RPM
• Desmopan diaphragm, anodised aluminium body
• Only 14 lbs
• Bolts to the existing mounting bracket

Technical Documents

• Udor KAPPA 15 DC Parts Schematic (PDF)
• All Udor Kappa Series Documents

Parts & Service

AES Waterblasters carries genuine Udor spare parts, diaphragm kits and valve kits for the Kappa series, with expert service and repairs from our Auckland workshop. Contact us on 09 271 4782 for parts, servicing or advice on the right pump for your application.

Related Models

Part of the Udor Kappa Series. Other models in this series:

• Udor KAPPA 7 12-Volt — 7.6 L/min (2 GPM)
• Udor KAPPA 15 12-Volt — 13.3 L/min (3.5 GPM)
• Udor KAPPA 18 12-Volt — 16 L/min (4.2 GPM)
• Udor KAPPA 25 — 26.5 L/min (7 GPM)
• Udor KAPPA 32 GR3/4 — 36 L/min (9.5 GPM)
• Udor KAPPA 43 GR3/4LP — 40 L/min (10.5 GPM)