The KAPPA 32 GR3/4 packages the KAPPA 32’s 36.0 L/min (9.5 GPM) flow and 38 bar (560 PSI) pressure with a built-in gear reduction unit for a 3/4 inch petrol engine shaft rated 4–6.5 HP. The gearbox brings the engine’s output down to the pump’s 550 RPM operating speed, so there is no belt drive to tension or replace. At 28 lbs it suits a compact petrol-powered spray cart or trailer where a mains or battery supply is not practical.
| Model | Udor KAPPA 32 GR3/4 |
| Flow Rate | 36 L/min (9.5 GPM) |
| Max Pressure | 38 bar (560 PSI) |
| Speed | 550 RPM |
| Drive Configuration | Gear reduction for 3/4″ shaft petrol engine, 4-6.5 HP |
| Weight | 12.7 kg (28 lbs) |
| Type | Diaphragm Pump |
AES Waterblasters carries genuine Udor spare parts, diaphragm kits and valve kits for the Kappa series, with expert service and repairs from our Auckland workshop. Contact us on 09 271 4782 for parts, servicing or advice on the right pump for your application.
Part of the Udor Kappa Series. Other models in this series:
We service and repair water blasters of all makes and models, not just our own, from our fully equipped workshop in East Tamaki, Auckland. Pump rebuilds, unloaders, burners, engines and full machine inspections, with water blaster servicing and repairs available across Auckland and nationwide.
My partner and I own a small water blasting company on Waiheke Island, and these guys have gone above and beyond to help us fix and solve all the issues...
Our AES Trailer mounted Water blasters are used every day, and just keep on going. They are great machines.
Thanks so much for your help. I will call the office to order that part. It is an absolutely amazing machine (AES Electroblast) So reliable and does a fantastic job.
46 Sir William Avenue
East Tamaki, Auckland 2013,
New Zealand
[email protected]09 271 4782Copyright © 2024 Aesblasters. - All Rights Reserved.
