Udor DELTA 100 1C IND — 26 GPM (104 L/min) Diaphragm Pump

The DELTA 100 1C IND is built to industrial duty specification, meaning heavier internal components and continuous-duty tolerances designed for round-the-clock operation rather than seasonal spraying alone. Mounted on a 1-3/8 inch, 6-spline PTO shaft, it delivers 104 L/min (26.0 GPM) at up to 40 bar (560 PSI) and 550 RPM, output that suits demanding contractor and industrial spraying tasks well beyond typical orchard use. The industrial-grade build extends service intervals and tolerates harsher fluids than the standard DELTA range.

Specifications

Model	Udor DELTA 100 1C IND
Flow Rate	104 L/min (26 GPM)
Max Pressure	40 bar (560 PSI)
Speed	550 RPM
Drive Configuration	Industrial duty; 1-3/8″ 6-spline male PTO shaft
Type	Diaphragm Pump

Applications

• Continuous-duty industrial spraying
• Contractor fleets running long daily hours
• Dust suppression and washdown in industrial settings
• Harsh or abrasive fluid transfer
• High-volume PTO-driven spray rigs

Key Features

• Industrial duty rated for continuous operation
• 1-3/8 inch 6-spline male PTO shaft
• 40 bar (560 PSI) maximum pressure
• 104 L/min (26.0 GPM) flow
• Heavier-duty internals than standard DELTA pumps

Technical Documents

• Udor DELTA 100 1C IND Parts Schematic (PDF)
• All Udor Delta Series Documents

Parts & Service

AES Waterblasters carries genuine Udor spare parts, diaphragm kits and valve kits for the Delta series, with expert service and repairs from our Auckland workshop. Contact us on 09 271 4782 for parts, servicing or advice on the right pump for your application.

Related Models

Part of the Udor Delta Series. Other models in this series:

• Udor DELTA 40 — 40 L/min (10.5 GPM)
• Udor DELTA 100 VA-IND — 104 L/min (26 GPM)
• Udor DELTA 40 TSFVA — 40.0 L/min (10.5 GPM)
• Udor DELTA 75 VA — 79.0 L/min (20.9 GPM)
• Udor DELTA 100 1C — 104.0 L/min (27.5 GPM)
• Udor DELTA 100 TSVA — 104.0 L/min (27.5 GPM)