Comet HPP H-100 UAP: Ultra High Pressure Water Jetting Pump

The Comet HPP H-100 UAP is the ultra high pressure version of the frame, with tungsten carbide plungers for hydro demolition, coating removal and the hardest water jetting work. Pressures run from 1,000 to 2,800 bar with flows from 12.2 to 35.1 L/min across 10 configurations. Supplied to order and commissioned in Auckland by AES Waterblasters.

Specifications

Code	Motor Speed	Pressure	Flow	Power
P231163H14120	502 rpm	2,800 bar (40,600 PSI)	12.2 L/min	63.5 kW
P231153H14120	517 rpm	2,800 bar (40,600 PSI)	12.6 L/min	65.5 kW
P231163H14140	502 rpm	2,500 bar (36,250 PSI)	16.7 L/min	77.2 kW
P231153H14140	517 rpm	2,500 bar (36,250 PSI)	17.2 L/min	79.6 kW
P231163H14160	502 rpm	2,000 bar (29,000 PSI)	21.8 L/min	80.6 kW
P231153H14160	517 rpm	2,000 bar (29,000 PSI)	22.5 L/min	83.2 kW
P231163H14180	502 rpm	1,400 bar (20,300 PSI)	27.6 L/min	71.4 kW
P231153H14180	517 rpm	1,400 bar (20,300 PSI)	28.4 L/min	73.7 kW
P231163H14200	502 rpm	1,000 bar (14,500 PSI)	34 L/min	63 kW
P231153H14200	517 rpm	1,000 bar (14,500 PSI)	35.1 L/min	65 kW

Applications

• Hull, dry dock and anchor chain cleaning
• Storage tank and boiler cleaning
• Hydro demolition and surface preparation
• Underwater pipe and platform cleaning

Technical Documents

• Comet HPP H Series Catalogue (PDF)

Parts & Service

Genuine Comet HPP parts support from our Auckland workshop. For selection, pricing and lead times call 09 271 4782.

Related Models

• Comet HPP H-100 SAP
• Comet HPP H-100 SAP L