Tornado Heavy Duty Range With Gear Box 4

The AES Tornado 140/15 is the entry-level model in the Heavy Duty range. A Honda GX200 engine drives a Udor AC 14/20 crankshaft plunger pump through an SI123 reduction gearbox, giving 140 bar at 15 L/min. It suits heavy-duty commercial cleaning, farm wash-downs, and property maintenance. Supplied with pressure gauge, UBI 20 unloader with chemical injection, thermal protector valve, 10 m hose, gun with 900 mm lance, and 25° nozzle.

Applications

  • Heavy-duty commercial cleaning
  • Construction site cleaning
  • Farm and dairy shed wash-downs
  • Fleet and vehicle cleaning
  • Paint preparation and surface stripping
  • Property maintenance

Specifications

Output Maximum 140 Bar (2030 PSI), 15 L/min
Engine Honda GX200 OHV, 4.1 kW, with low oil alert system
Pump Udor AC 14/20 crankshaft plunger pump, brass manifold, solid ceramic plungers
Gearbox SI123 3/4" reduction gearbox
HP Hose 10 metre wire braided with couplers
Gun & Lance Gun with 900 mm S/S lance & 25° nozzle

The pump is rated 200 bar at 14 L/min at its nominal 1450 RPM. On this machine it is driven above that speed, which lifts flow, while available engine power sets the working pressure and the hose and nozzle set what reaches the surface.

Key Components

  • Engine: HONDA GX200UH2QX2 4.1 kW with 3/4" shaft
  • Pump: UDOR AC 14/20 PLUNGER PUMP (rated 200 bar, 14 L/min at 1450 RPM)
  • Gearbox/Drive: SI123 3/4" REDUCTION GEARBOX
  • Unloader/Regulator: Udor UBI 20 (VB35) unloader with chemical injection and adjusting knob
  • Pressure Gauge: 250 bar (3600 PSI) D63 gauge
  • Safety: BURST DISC – GREEN (3500 PSI) and VT6 thermal protector valve
  • Frame/Chassis: AE0002 FRAME – TORNADO SMALL, with handle and 4" wheels
  • High-Pressure Hose: HP HOSE 10 METER 3/8" with 3/8" M/FM
  • Spray Gun: PA RL26 high-pressure gun (40 L/min)
  • Lance: PFL900mm 1/4" S/S LANCE WITH GRIP
  • Nozzle: 25° 0.050 nozzle, 1/4" NPT
  • Intake Filter: PA brass filter body 1/2" M with S/S filter element

Technical Documents & Manuals

View parts catalogues, datasheets, and service manuals:

Parts & Service

AES Waterblasters carries a comprehensive range of genuine spare parts, including seals, valves, plungers, bearings, and all common service items. Contact us on 09 271 4782 or visit our Auckland showroom for parts enquiries.

Servicing and repairs

We service and repair water blasters of all makes and models, not just our own, from our fully equipped workshop in East Tamaki, Auckland. Pump rebuilds, unloaders, burners, engines and full machine inspections, with water blaster servicing and repairs available across Auckland and nationwide.

Book a service

    Our Client Testimonials

    Our Partners