HYDRO TEK 240/20HU Engine Powered Skid Hot unit

Industrial duty Skid mounted Self contained Hot cleaner designed for over 20 hours usage per week.
C/w: Rugged Pro-tect-it powder coated steel frame with fork pockets & lifting eyes plus S/S panels
Honda GX630 V-Twin Industrial duty Petrol engine (20 HP) c/w Electric start, Low oil cut out, Hour meter
V Belt driven Low RPM drive c/w S/S belt guard. Pump speed 1450 rpm
Udor GC21/24S triple ceramic plunger pump
Output: Maximum 240 Bar (3500 psi), 20 L/min flow rate
Tough Schedule 80 steel Boiler coil, Diesel powered burner
Temperature is thermostatically adjustable to 110 Deg C.
Self contained with onboard 110 Volt 2900 watt Generator – for powering optional Vac recycling unit
Unloader valve, safety valve & pressure gauge.
Large capacity roto moulded fuel tanks with filters allow up to 8 Hour operation for extended run times
20 meters heavy duty wire braided heat proof high pressure hose
Heavy duty high pressure gun c/w 1200mm lance & nozzles.

We can also supply this unit Trailer mounted c/w 750 Litre water supply tank & hose reels.

Accessories:

• ANT24 Hydro rotary flat surface cleaner .
• Stainless steel body, 600mm Cleaning diameter, with 3 x H.D. castor wheels, handle & gun .
• Brush skirt reduces splashing on buildings and operator.
• Cleans 10 to 15 times faster than standard gun & lance.

HAZV55 Vac recovery system

c/w 2 stage motor (powered by generator on Hydrotek unit)
pre filter in hopper with drain valve & two replaceable cartridge filters.
Filtered water is returned to water supply tank for reuse.

ANTV5 Hydro Twister vac rotary flat surface cleaner

. Stainless steel body, 600mm Cleaning diameter,
with H.D. castor wheels, handle & gun . Recovers up to 90% of water and contaminants.
15 meters (45 ‘) 2″ flexible Vac recovery hose
1.8M Rubber sand filled boom (sand not included), 3m Sand dam tubes, Vacuum scupper attachment