Alberti Maxijet – Industrial duty hot cleaners.

Alberti Maxijet Hot water cleaners are fitted with UDOR heavy duty low RPM crankshaft driven pumps and 4 pole low rpm  (1450 rpm) electric motors.

They are fitted with a number of safety devices including a safety flow switch (in the event the water supply fails), low voltage circuitry, delayed total shut-down (TS) and an anti leak safety device.

The Tough ABS covers (same material as a Ute deck liner) takes the knocks and is easy to keep clean.

Bumper protection bars are fitted as standard to protect the water inlet & outlet fittings and make a useful tie down point for transportation.

Alberti Maxijet 110/11 TS

Output:               Maximum 110 Bar (1600 psi), 11 L/min.

Motor:                 2.2 Kw (3.0 Hp) 230 volt 50 hz, 1440 rpm

Temperature:     Hot water to 100 degree C.

Hose:                   12 meters 3/8″id  wire braided high pressure hose with cpuplers

Gun:                     Vega swivel gun + LD9  S/S Twin lance & wash jets

Alberti Maxijet 200/15 TS

Output:               Maximum  200 Bar (3000 psi), 15 L/min.

Motor:                 5.5 Kw (7.5 Hp) 400 volt 50 hz, 1440 rpm

Temperature:      Hot water to 100 degree C.

Hose:                   12 meters 3/8″id  wire braided high pressure hose with couplers

Gun:                     Vega swivel gun + LD9  S/S Twin lance & wash jets

Alberti Maxijet 200/20 TS

Output:               Maximum 200 Bar (3000 psi), 20 L/min.

Motor:                 7.5 Kw (10 Hp) 400 volt 50 hz, 1440 rpm with double bearings

Temperature:      Hot water to 90 degree C.

Hose:                   12 meters 3/8″id  wire braided high pressure hose with copuplers

Gun:                     Vega swivel gun + LD9  S/S Twin lance & wash jets

Hour meter:       Fitted as standard equipment.

Huge volume heavy duty industrial 3 phase hot cleaner suitable for continuous operation. For fleet and heavy equipment cleaning, larger factories, container depots etc.

Optional Accessories (all models):  Extension hose, Wall mounted Hose reels, Various nozzles, Anti scale kit, Steam kit.

A note on Steam: 

Many brands of Hot cleaners are fitted with a thermostat which reads 150 degrees on the dial, but this doesn’t necessarily mean that the unit will produce steam.  Usually a steam kit needs to be fitted.  A steam kit reduces the volume of water flowing through the boiler coil, so the remaining water stays in the coil longer and becomes hotter and hotter.  The result is a mixture of hot water and steam vapour. If you require true steam for sterilization or special processes then see our Alberti Medivap Steamer.

Contact us

Output: Maximum 200 Bar (3000 psi) 15 L/m flow rate.

Temperature Thermatatically adjustable to 95 Degree C.

Electric motor 400 volt 5.5 kw 50 hz.

Safety devices:  Total stop. Low fuel cut-out, Flow switch (low water protection) Anti leak device.

Supplied with Chemical injector, 20 meters wire braded hose and Vega gun with S/S Twin barrel lance lance and wash jets.

Options: Varrious hose lengths, Hose reels, varrious lances, turbo nozzle.

Contact us for further information.

Alberti Medi-vap Steamer

The Alberti Medivap is a compact machine, yet it produces a large volume of steam at up to 7 Bar (100psi)

A simple and intuitive LED screen guides you step by step through all the functions, and gives you operating parameters as well as safety information.

Power supply:                 Single phase,  230 volt, 50 hz

Water consumption:    Dry steam:  .2 L/min

                                            Wet steam: .5 to 2 L/min

Steam droplet:               Maximum 5 micron (dry steam)

Temperature:                 Maximum 160 degree C – wet steam

                                           Maximum 210 degree C – dry steam

Heating fuel:                  Diesel fuel

Contact us